How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct procedure to add the second key. It requires dealer assistance using the handheld computer known as Tech-2. Then the transponder must be replaced and a key have to be purchased.
Rotate your keys to stop one from wearing out more than the other. This will help keep your keys in good condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They have electronics that make it difficult to duplicate. This has made car theft much more difficult than it was twenty years ago. It also makes it more expensive to replace lost keys.
Saab 9-3 owners must have two keys that work. If one gets lost, it costs a lot of money to add another to the car because it involves replacing the CIM module, and then reprogramming the locking cylinders. www.thekeylab.co.uk between $100 and $200 to do this.
There are ways to cut down on these high costs. Some parts suppliers will look up the code from an extra key (usually the same one that opens the doors and switches the ignition) and cut a brand new key blade out of metal for less than the dealer's cost. The key, however, must be the same as the original one in order to function in your vehicle.
Follow these steps to replace the case. You'll require an flathead screwdriver and patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once you have the case open, remove the electronics and place them into the new case. Be sure to put the correct badge and key back into the case as well.
Replacement Battery
The replacement battery for the Saab 9-3 is an inexpensive component that can be replaced quickly and easily. The YouTube video of Cyclone Cyd demonstrates how you can replace the battery of the remote fob with only four steps. This tutorial can be used with any modern Saab key fob. However, the procedure may differ slightly.
The first step is to locate the button that will release the backup key inside the fob. This button is typically located on the back of your fob, just below the Saab Logo. Use a flathead screwdriver to insert the screwdriver into the small hole in this button. This should be enough to open the case so that you can replace the battery.
After you have installed the batteries CR1632, it is possible to restore the remote key fob. Then, you can program it into your car. The whole process should not take more than one hour. This is a straightforward procedure that doesn't require special tools.
If you lose a key the process will be somewhat more complex, but it can still be accomplished. The dealer has to find the VIN number of the car and then order a new key blade and TWICE module that has the proper unique code. The dealer will then have to program the key using MDI, a brand new software tool.
Key Replacement Fob
The key fob is the piece that locks and unlocks your car, it's got a battery within. The batteries last for a period of that is a long time, and they eventually expire. This is a frequent issue for all vehicles. The good news is that you can replace the battery in most key fobs without having to replace the entire case. Amazon sells fobs for replacement that already have all the electronics installed. You can simply pop the case open and replace the batteries. It is important to keep in mind that you'll have to remove the emergency key first, and you can accomplish this by inserting an incredibly small screwdriver with a flat head into the slot in the middle of the case. The case will split as you work the screwdriver all around it.
If you're looking to replace your keys, keep a spare in your possession. This will save you lots of money. If you have an extra key, request the dealer to cut it and program it for your car. This is less expensive than buying a new key fob.
It is possible to add a second key to your vehicle in the event that you don't have one, but it requires some research and effort. It costs a few hundred dollars to add an additional car key. The computer of the car also needs to be programmed. Professionals can do this but it's not a cheap option.
Replacement Ignition
In contrast to the earlier Saab automobiles, the current SAAB 9-3 models have an upgraded alarm system that is dependent on a coded keys. This means that in the event that you lose your only working key, adding another key can be extremely expensive since the car has to have a specific computer module installed and it must also be programmed to accept a new key. The majority of locksmiths aren't able to do this, and even a dealer will charge several hundreds of dollars just to program the new key!
Dealers will charge you top dollar to replace your car computer (also called the CIM or SAAB twice) If you lose your sole working key. Instead, we can reprogram the EEPROM on your existing car computer, preparing it for a replacement key, slashing over 50% of what you'll be charged at a dealership.
If you have owned a SAAB 9-3 quite a while, you know that the ignition keys are not very durable. If your ignition key isn't working correctly, you should think about replacing it. They can become sticky and the buttons can fall off. It's not so difficult as it may seem to replace the ignition key. With the appropriate tools, it could be accomplished in a matter of minutes.